|
| | | 
Ich bin ein Berliner!!!
Group: Administrators
Last Login: Today @ 7:02:10 AM
Posts: 2,926, Visits: 5,713 |
| Although they are pretty self explanatory to install, I figured Id lay it out for people.
Your mugen kit should come with everything you need. Here is a picture of the contents, sorry, there are 4 additional screws that are not pictured, but they looks similar to the black ones, only they are silver and have the angled heads.
Setting up for installation. Remove the rubber covers on your stock pedals, they come off pretty easy. Just peal them of around the corners....
Next, remove the backing from the sticky pads on the pedals. These are there mostly to help it stay in place while you screw the Mugen pedals to your car pedals.
Then you slip the pedals onto your pedals. You will notice the bottom of them have a slot, this slot should line up with your pedals like soo..
Now you are ready to bolt them to the pedal. No drilling of your stock pedals is necessary. You will need the following...
You will notice that the screw holes are cut offset of center. Thats because the larger side is used as a lip that wraps around the back of you stock pedals.
Now hold the bracket to the back of your pedal, and line up one of the holes with the smaller Allen Key, then (keeping the bracket just like that) place the screw in whole. And begin to tighten it.Do not tighten it up all the way, because it will make it harder to line up the second hole.
Use the same technique on the other screw. Its a little tricky, but with some work, you should be able to get them both lined up. Once you have, tighten them completely, be careful not to over tighten them, but they should feel pretty snug once they are tight enough.
Repeat these steps for the second small pedal.
The gas pedal uses the same technique but has the lip bracket on the top and the bottom. You will use the silver Allen screws for this one. Make it is lined up with your stock gas pedal before tightening all the way.
Now you are done...
With the custom Mugen dead pedal from a guy on PO.com....
Guten Tag!! Ich mag Käse |
| |
| | | Supreme Being
Group: Forum Members
Last Login: Yesterday @ 8:42:30 AM
Posts: 382, Visits: 1,997 |
| very nice. i love mine. we have matching pedals (and dead pedal) 
 |
| |
| | | Supreme Being
Group: Forum Members
Last Login: Yesterday @ 11:18:02 AM
Posts: 389, Visits: 1,894 |
| bling bling
 |
| |
| | | Supreme Being
Group: Advanced Members
Last Login: Yesterday @ 6:21:16 PM
Posts: 264, Visits: 1,867 |
| where did you get the dead pedal? i need one of those
---------------------
- Steve
2008 BMW 135i
2007 Chevy Corvette Z06
|
| |
| | |
Ich bin ein Berliner!!!
Group: Administrators
Last Login: Today @ 7:02:10 AM
Posts: 2,926, Visits: 5,713 |
| Krugar (8/26/2007)
where did you get the dead pedal? i need one of those
A guy on Prelude Online made them. RedPreludeOO, I believe is the guy I got mine from.
Heres the thread from when I got mine....
http://www.preludeonline.com/showthread.php?t=203885&highlight=mugen+dead+pedal
Guten Tag!! Ich mag Käse |
| |
|
|
